So you want to set up WiFi in your basement, but can’t because the signal from your router just isn’t getting to all of the basement floors. I’ve got good news for you though. There is a simple solution that won’t cost you anything but 10 minutes or less (depending on how much of an OCD freak you are with wiring). In this article, we will reveal tips on how to enjoy your WiFi in the basement! Keep reading to know more!
Is It Possible To Have WiFi In The Basement?
It’s not impossible to have WiFi in the basement, but it might be difficult if you don’t know where to start. A basement is often a place where Wi-Fi signals get blocked by walls and other obstructions.
The first thing you need to do is check if your home’s electrical system is grounded. If it isn’t, it will be very difficult, if not impossible, to get WiFi in the basement.
Then, expect that the range of your signal will be limited because of walls and ceilings between floors; this means that if someone is playing music on their laptop upstairs, it might not reach all the way down into the basement unless they move closer together.
But to make things possible, you can try following our tips to enjoy your WiFi connection without any obstructions.
Tips To Get WiFi In Basement
WiFi is a great way to get the internet in your home, but it can be hard to set up. You may want to add wifi to your basement because basements tend to be darker and more difficult for cable connections. However, they are also harder for wifi signals to penetrate. In this section, we’ll look at how you can set up wifi in a basement and make sure it works well!
📶 Get a long Ethernet cable.
A long Ethernet cable is your first and best option. You can find them in many lengths, and they’re generally cheap and easy to use. All you have to do is get one and plug it into the back of your computer or router (whichever device has the internet), then run the other end down into your basement so that it reaches where you want to connect.
If you only need a few feet of extra length, there are many options for those as well. A 12-foot ethernet cable will work just fine for most people who need just a little bit more distance than what came with their original equipment. But if your house is large enough that even 12 feet won’t cut it, don’t worry! There are plenty of other solutions out there as well: keep reading below!
📶 Buy a Wi-Fi repeater.
A WiFi repeater is a device that picks up the signal from your main router and re-broadcasts it in other areas of your home. If you have an older, slower modem or router, a repeater can help boost speeds and range in places where they’re lacking.
A WiFi access point (AP) is essentially another router that you can use to extend the range of your existing system. While APs are often used in conjunction with routers and modems for large homes or offices, they can also be used on their own as standalone devices to get better coverage throughout a building.
📶 Powerline Adapters.
If you’re looking for a more permanent solution that involves less gear and work, powerline adapters could be the answer. Powerline adapters use the electrical wiring in your house to create a network of wifi hotspots. They’re easy to set up and typically provide better performance than wireless adapters since they don’t have to send signals through the air.
>>How do they work?
The process is simple. Plug one adapter into an outlet in your basement then plugs another adapter into an outlet near where you want to have access to wifi (for example, near your router). The two devices will establish a connection with each other via electrical wires within walls and floors, allowing them to communicate over home networks at speeds between 200 Mbps and 500 Mbps depending on how far apart they are located from each other.
This connection can also extend outside of homes by using Ethernet cables if needed as well as providing internet access through USB ports on some models.
📶 Get a mesh router system.
If you’re looking for a way to get wifi in your basement, a mesh router system is an answer. These devices are easy to set up, affordable and reliable. They also work with any internet provider and you can use them in almost any location, including underneath a house!
The best part? Mesh networks are much easier than traditional routers because they don’t require any complicated setup or configuration. All you need is one device plugged into an existing router, then other devices placed throughout the space you want to cover with internet access (such as under a house). That’s it!
📶 If all else fails, set up another access point down there.
If you’ve exhausted your options and still can’t find a way to connect to the internet in the basement, you have one more option. Set up another access point! This is likely to be more complicated than plugging in a router and setting up a repeater. But it may be worth your time if you don’t want to move out of your house or pay thousands of dollars for an installation.
To do this, you’ll need two routers (one for each floor), and an Ethernet cable (or wireless connection) between them. In other words, it is completely possible that both floors have wifi signals coming from different devices and going through different walls, then, there will be interference problems with using just one router system. This is because there are too many variables involved when using only one device instead of two separate ones.
However, if we were talking about two separate houses without any sort of physical connection between them whatsoever then yes, the best way to get your wifi in your basement is to use a long ethernet cable or a wi-fi repeater.
BONUS: Ways To Make WiFi Connection Strong In The House
The best thing about the internet is that you can connect to it from anywhere. You can be in your office and still access the internet through a WiFi connection. With a strong WiFi connection, you would be able to get online with ease. If your home has poor Wi-Fi coverage or if it experiences frequent interruptions, then this section will surely help you fix that problem once and for all!
📶 Upgrade the Router Firmware
Upgrading the router firmware can improve its performance, but it’s important to know that not all routers allow you to do this. If your router does not have a built-in option for updating its firmware, or if you simply want to see if there are new versions before downloading them yourself, check out this list of some of the best options out there.
Finally, if your laptop or PC still doesn’t connect well even after updating your router firmware and there is no other obvious reason (like another device in use), try changing your WiFi channel from auto-detection mode to manual selection mode where you can select the exact frequency band that works best for your home network.
📶 Understand the causes of Wi-Fi interference
If you’re having trouble connecting to your Wi-Fi, there are a number of things you can try to fix this problem. You may need to change the channel that your router broadcasts on or reposition it so that it gets a better signal. You could also try increasing the length of time between the packets being sent from your computer and how often they are sent. These are all things that can help improve how strong your WiFi connection is in the house.
Wi-Fi interference can be caused by other wireless devices in your home. Electrical appliances like microwaves can also interfere with your WiFi connection because they emit both radio frequency (RF) noise and magnetic field emissions, which disturb wireless signals passing through them. The bottom line is that anything with an electrical motor (like some refrigerators) can cause issues with wireless networks if placed too close together!
📶 Check the firmware settings
If your router is a dual-band model, make sure that it’s set to use the 5GHz band. This will help avoid interference from other wireless devices in your home.
If you have any network devices that are using the same channel as your WiFi network, this could also cause connectivity issues. Try changing the channel on each of these devices so they’re not on the same one as your router. If you can’t change channels on these devices, try changing yours so they don’t interfere with each other anymore, and vice versa!
You may also want to check for any nearby networks with similar SSIDs (the name associated with a wireless network). If there are multiple networks named “Linksys,” for example, this could be causing interference and slowing down your internet speed or making it impossible for certain applications like Netflix or Spotify to work properly.
📶 Place the router in a perfect location
To make sure that your router is in the right location, there are a few things to keep in mind:
- Place it in a location where there are no obstructions. Walls and other barriers can interfere with the signal, so try to place it somewhere near the center of your house.
- Place it on a flat surface. Avoid putting it under furniture or against walls. It’s best if the router is able to breathe properly and get plenty of airflow around it.
- Avoid placing the router in a corner or next to another device (like an air conditioner) that might obstruct its signal coverage area.
📶 Install a repeater or booster
If you want to strengthen your WiFi signal in a specific part of the house, consider installing a repeater or booster. These devices are designed to receive wireless signals from your router and rebroadcast them at an increased range. You can find these devices in many forms at most electronic stores. Some look like small routers, while others resemble long cords with an antenna attached to them.
A repeater basically receives the WiFi signal from your router and then rebroadcasts it to another area of your house that has weak reception. This can be useful if you have one particular room where there is low coverage but several other rooms with good coverage (like a bedroom or basement). A booster is similar to a repeater, except that it amplifies the strength of your current WiFi signal instead of just repeating it over again so that more people can connect at once. And this would happen with multiple users accessing wireless Internet connections simultaneously.
📶 Adjust your router settings to minimize interference
- Turn off the power-saving mode.
- Reduce the number of devices connected to your router.
- Place your WiFi router away from metal objects, like mirrors or filing cabinets.
The first two steps are simple enough. Turn off the power-saving mode and reduce the number of devices connected to your router (more on that later). The last one is a bit trickier, but if you’re having issues with WiFi connection strength in a specific area of your house and have tried everything else on this list, then it could be worth considering placing an object between the device sending out WiFi waves and where they need to go (your laptop).
📶 Update your device drivers
Updating your device drivers is one of the most important steps you can take to ensure a strong WiFi connection. The reason? Driver updates are crucial because they often fix bugs, soothe performance issues and just make things work better overall. Drivers can also cause interference that degrades your connection quality.
Final Words
With these tips, you will surely be able to strengthen your WiFi connection in your basement and the whole house. They are easy to follow, effective, and inexpensive.
You can also improve the performance of your router by upgrading its firmware from time to time. This will help minimize interference from other devices that may cause problems with your wireless network’s signal strength or speed.
So, there you have it. We hope that this article has been helpful to you and if so, please share it with your friends who may also be experiencing similar problems with their connections!
You can also click here to know how to make your WiFi connection strong in every room.
